FZRSupport: the FZROnline Archive

kilika2 wrote:Cleaning is easy, takes about 3 hours your fist time. Also helps to understand all the innards when talking to others. I have a good from the archives if you need it.

Chris

Where or what is it under so I can take a look at it, Thanks.

Shannon

I was thinking of trying this and was wondering how hard of a job and or comments, suggestions or hints on how I should do this. I have the Haynes manual and it doesn't seem like it would be that hard but would like someones opinion that has done it before. The local Yamaha dealer told me $300 to th...

thank you to everyone with input, I replaced all three pieces of the pushrod, the longer pc. the ball, and short push rod and like new again. While I was in there I replaced friction and steel plates and springs.

Thanks again to all.

I took everything apart and the long push rod, ball and short push rod are friction welded together and the long push rod is shorter so I'm sure this is my problem. I have to order parts and replace, also need to replace springs, clutch plates worn and dis-colored. The clutch boss has some burrs on ...

Will I need to drain all the motor oil first and if I'm going to pull all that stuff should I just replace it right away?

I'm new to the forum which I want to say is great, however I have been reading alot of the past posts on the clutch cable adjustments and either I'm over looking the answer to my problem or I'm just not getting it. I replaced the clutch cable cause I assumed it was stretched but the new cable is the...