FZRSupport: the FZROnline Archive

Thanks mawler. That was really helpful. the resistance seems to be ok. i get 2ohms at the top of the coils at the solder point. The plug caps read between 9.9 and 10.8. and the plug wires read 13.1k and 16k. I've squirted some oil in the cylinders to try and get the piston rings to seat (if that was...

Ok so I figured out the flooding issue. I had the fuel hose connected to the carb vent hoses. screwy I admit that was a rookie mistake. But it still only starts with 100% throttle and after quite a few turns. Only starts on 2 cylinders, but after letting off the throttle then opening it back up the ...

I'm at a total loss and so I'm hoping someone on here has some advice. I've been building an '89 FZR essentially from the ground up. I was given a frame for free and I got a motor from someone else. I've made really great progress with it and the only thing left to do is to get the motor to run cons...

I got a new harness for 400 given to me by a friend. The harness on my 600 is pretty messed up from the previous owner. I know this process seems backwards, but I'm just trying to keep costs down. I was wondering if anyone has done this and what, if any issues, came up.